Stainless steel toilets

SS-PAN-FM Stainless steel toilet

The more modern stainless steel toilet is ideal for factories, mining and other industrial locations. This stainless steel toilet is suitable for commercial installations. Restaurants, offices, shopping malls, petrol stations and schools use vandal resistant toilets.

It is just as strong as the HCL Pedestal Pan and made from the same quality grade 304 stainless steel.  A small lip at the bottom serves as the tiling key over which the floor tiles are placed for a neat and water proof seal.  The base of the stainless steel toilet can also be bolted to the floor.

Stainless steel toilets are popular in commercial and industrial areas where vandalism is a problem. Stainless steel toilets are more durable and hygienic than ceramic toilets. In most cases, toilet seats are not installed since they are stolen or broken anyway. Grade 304 (18/10) stainless steel and 1.2 mm thick, is used which will not rust. The unit is manufactured with a pressed flushing rim and integral “P” Trap with a 102mm outlet pipe, and a 60mm back entry inlet pipe to suit a rubber flush inlet sealing bung. The pan has a Stainless Steel base which has flanges with 6mm holes for fixing the pan to the floor.

Water conservation and quality assurance. Complies with SABS and LGA DIN EN International Standards.

Please order seats separately.

Stainless steel toilet features.

  • Thick 1.2 mm grade 304 stainless steel
  • Suitable for concealed or exposed flush systems
  • Can be connected to stainless steel cisterns
  • Vandal resistant
  • Hygienic
  • Will not chip or crack
  • Can be used without seat
toilet wc closet high roof level cistern chain

Stainless steel toilet pan with high level cistern with pull chain.

toilet pan flushmaster vandal resistant

SS-PAN-FM pan with the W-104B flushmaster valve

Stainless steel toilet vandal proof grade 304

SS-PAN-FM
Toilet made from grade 304 stainless steel. Ideal for installations where vandalism is a problem. Often installed in modified containers, buses and trains.

 

Side view

vandal resistant strong WC

Top view

 

SS-PAN-BW – Back to wall vandal resistant toilet pan

The SS-PAN-BW is made from high grade 304 stainless steel and is ideal for vandal prone installations. Use concealed flush valves such as the WC-106C-SS or WC-107 range of flush valves. A duct type plastic cistern with pneumatic actuator can also be used. This toilet does not come with a toilet seat as there is not access to the bottom to tighten the screws. This toilet is ideal for really problematic vandal installations.

shrouded back to wall toilet pan stainless steel

SS-PAN-BW
Stainless steel back to wall toilet pan. Ideal for vandal prone installations

 

 

 

SS-PAN-WH wall hung stainless steel toilet pan

For wall hung installations the SS-PAN-WH is ideal.  Also suitable for vandal prone installations. easy to clean under the toilet. The unit is bolted to the wall with 12mm anchor bolts (supplied by installer). The toilet must be flushed with concealed or duct type flush valves. Space for a seat is available. Request seat holes when ordering. Most toilets seats fit this model.

stainless steel wall hung toilet pan

SS-PAN-WH
Wall hung stainless steel toilet pan


HCL Pedestal toilet

The HCL Pedestal Pan is the most popular stainless steel toilet for use in commercial and industrial applications.  Most commonly used with a stainless steel cistern (low level or high level options). Franke Model HCL Pedestal Pan, is manufactured from Grade 304 (18/10) Stainless Steel, 1,2 mm thick. The unit is manufactured with a pressed flushing rim and integral “P” Trap with a 102mm outlet pipe, and a 60mm back entry inlet pipe to suit a rubber flush inlet sealing bung. The pan has a Stainless Steel base which has flanges with 6mm holes for fixing the HCL pedestal pan to the floor.

Features

  • Grade 304 (18/10) Stainless Steel 1.2mm gauge
  • Hygienic and durable
  • Hinged bucket grid
  • Outlet to suit standard 110mm PVC or cast iron “P”-Trap
  • 22 workday lead time for manufacturing if there is no stock

Optional Flushing Systems:

  • Surface wall flush valve mounted or concealed Flush Valve
  • High level Stainless Steel cistern with Supa Flush Valve and a 41mm diameter Stainless Steel flush pipe.
  • Low level Stainless Steel cistern with Supa Flush Valve and PVC flush pipe.
  • Low level security cistern with optional pneumatic actuator for duct installation

Model BE (Back Entry): Flush Valve Specifications:

  • Concealed flush valve back entry built in boxed model: W-107CHP or W-107CLP
  • Back entry: W-104B with isolating valve (Recommended option)
  • Back entry: W-106B without isolating valve
  • Back entry: W-550B – Ideal for shopping malls and hotels.

Other more vandal proof flush valves that require a duct for installation are:

  • W-103 XP and VR – 20mm BSP
  • W-106 XP and VR – 25mm BSP without isolating valve
  • W-104 XP and VR – 25mm BSP with isolating valve

All three models are also available in stainless steel buttons that are used in prisons and high risk installations.

Water conservation and quality assurance: Complies with SABS and LGA DIN EN International Standards.

Franke HCL pedestal toilet pan 356084 356072 toalete stainless steel vandal resistant

hcl-pedestal-wc-pan-diagram-side

hcl-pedestal-wc-pan-diagram-back

hcl-pedestal-wc-pan-diagram-top

 F-HDTX597 Wall Mounted Shrouded Pan specification

Franke F-HDTX597 Heavy Duty Wall and Floor Mounted WC Pan 360 x 550 x 410 mm high. The toilet pan is manufactured from Grade 304 (18/10) Stainless Steel 1,2 mm gauge. It is manufactured with a pressed flushing rim and integral “P” Trap with a 100 mm outlet pipe and a 60 mm back entry inlet pipe to suit a rubber flush inlet sealing bung. The pan to be manufactured with a shroud, meaning the toilet pan completely covers the floor and wall, with external flanges for securing the pan to the wall and into floor with anchor bolts. (Bolts elsewhere measured). Back entry model only.

Options: Extended 250mm stainless steel outlet pipe.  This is ideal for industrial use where security and durability are crucial.  The outlet pipe can extrude through a double wall and connected to the PVC main outlet system. Since the toilet covers the floor and wall completely, it has been found that connecting the toilet outlet on the other end of the wall is much easier.  The Franke F-HDTX597 with 250mm extended pipe is a popular choice among installers.

The Franke F-HDTX597 toilet can be ordered with the following seat options:

  • No toilet seat (ideal where vandalism and theft is a problem)
  • Black wooden slats bolted onto the toilet which requires an alan key to remove.
  • Industrial strength black toilet seat.

NOTE: We do not recommend using a toilet seat with this pan unless you have access from the back or install an access lid to the side of the toilet.  On the standard model there is no access to the hinges under the toilet so this must be taken into consideration when selecting a seat.

A custom option for the Franke HDTX597 shrouded pan is to have the outlet protrude directly down, much like a “long drop” toilet.  This is quite often used in trains and containers where the flushing mechanism is installed below the toilet.

Features:

  • Grade 304 (18/10) Stainless Steel 1.2mm gauge
  • Hygienic and vandal resistant
  • Pressed components to ensure consistent quality and performance
  • 4 or 6 litres flushing
  • Heavy duty outer casing conceals the plumbing
  • Pressed flushing rim
  • Provision for secured fixing through wall and into floor
  • Optional provision for seat or wooden slats
  • Optional outlet and flush inlet pipes are available, which can be shortened/lengthened to suit plumbing
  • Sub-assembly of pan is treated and designed to prevent corrosion
  • 22 working day manufacturing lead time if there is no stock.  All custom designed toilets require at least 22 working days lead time for manufacturing, which might exclude design time.
back to wall vandal resistant toilet pan

F-HDTX597
Shrouded back to wall stainless steel pan

hdtx597-shrouded-pan-diagram-top

hdtx597-shrouded-pan-diagram-back

hdtx597-shrouded-pan-diagram-side

CMPX range stainless steel wall hung toilet

The CMPX592 wall hung toilet is manufactured from Grade 304 (18/10) Stainless Steel.

Dimensions: 360 x 550 x 350 mm.

The CMPX592 wall hung toilet can be used either as a back entry or top entry wall hung toilet.

The most popular method is a back entry system coupled to either a concealed cistern made by Geberit, Grohe or Walcro (Walcro is the most used and easy to install).  Concealed Flushmaster systems are also quote often specified. The CMPX592 is supplied with 3 mm thick Stainless Steel wall fixing bracket and fitted in accordance with manufacturers specifications using 4 x 8 mm anchor bolts. Compliant with SABS 1733:1998 and SABS 497:1991 WC pan to flush with 4 and 6 litres of water. Pan to withstand point load of 400 kg as per international standards.

Features:

  •  Grade 304 (18/10) polished Stainless Steel
  • Hygienic and vandal resistant
  • Pressed components to ensure consistent quality and performance
  • 4 or 6 litres flushing
  • Heavy duty outer casing conceals the plumbing

Flush mechanism for Wall hung pans:

  • Back or top entry inlet to suit 38 mm flush pipe connection for a Flush Valve or
  • Designed to fit onto a concealed flushing system

Water conservation and quality assurance. Complies with SABS and LGA DIN EN International Standards.

Toilet seat options:

High quality black plastic industrial toilet seat, black toilet slats or nothing. The selection will depend on the specific application of the toilet.  In most mining and industrial applications no toilet seat is used with the wall hung CMPX592.  In factories, public ablutions and where some form of vandalism may occur, the slat option is most preferred.  Where there is little change of vandalism the industrial black toilet seat is installed.  There is no stainless steel toilet seat available on the market.

CMPX592 stainless steel wall hung toilet

wall hung toilet stainless steel diagram CMPX592

cmpx592-diagram-back

 

cmpx592-diagram-side

cmpx592-diagram-top

CMPX594 stainless steel paraplegic wall hung toilet

cmpx594

cmpx594-diagram-back

cmpx594-diagram-side

cmpx594-diagram-top

Recommended flush mechanisms.

  • Top entry: Walcro 104T, Walcro 550T, Walcro 106T
  • Duct back entry: Walcro 103LC, Walcro 104C, Walcro 106C (Available in Walcro XP, VR and SS push button configuration)
  • Concealed flush valve back entry built in: Walcro 107CHP or Walcro 107CLP

Images below show the VR button.

duct concealed flush valve toilets wc

Walcro W-104C-SS duct toilet flush valve with isolating valve. Recommended for prisons and mining)

low pressure duct toilet flush valve

Low pressure W-106C-SS (30-600 kPa) duct type toilet flush valve.

prison toilet flush valve

Walcro W-103LC duct type concealed toilet flush valve.