Call Us Today! +27 76 944 2717 (Whatsup and Skype) |sales@afindcom.com
Toilet flush valves 2017-01-20T07:26:14+00:00

Toilet flush valves – Concealed and exposed


CAPTCHA
Please wait...

103LC high pressure concealed duct toilet flush valve

The concealed 20mm toilet flush valves consist of three different types:

  • Walcro 103LCXP – Comes with a VR button
  • Walcro 103LC – Comes with the XP button
  • Walcro 103LC-SS – Comes with a stainless steel sleeve for use in vandal prone locations.

Operating pressure range: 100 kPa – 600 kPa.

All three valves have the same inner design.  They are designed to be installed BEHIND the toilet wall in a space called a DUCT.  Access to the toilet flush valve is not inside the bathroom or where the toilet stands, but in the duct.  Many hospitals and some government buildings have ducts where all the water piping is installed.  It is also separate from the electrical and communications wiring.  All prisons have ducts and that is where the 103LC-SS is used. See the image below where the flush valve is placed.  The toilet can be either a wall hung or pedestal type, it does not matter, as long as it is a back entry model.  Top entry models require exposed flush pipes and are not suitable for vandal prone locations.

Installations:

  • Stainless steel toilet
  • HCL Pedestal pan
  • HDTX594 Shrouded stainless steel toilet
  • CMPX592 Wall hung stainless steel toilet

Features:

  • Made in South Africa
  • DZR brass
  • 100-600 kPa operating range
  • Spare parts are available.
  • Easy to maintain
prison toilet flush valve manufacturer south africa

103LC High pressure duct toilet flush valve. Pressure range 1 bar – 6 bar. Three button options are available with this flush valve

Concealed flush valve installation on stainless steel toilet

Stainless steel wall hung or pedestal pan toilets can be installed with a hidden flush valve if you have a duct. If there is no space behind the wall, the boxed Walcro 107 range must be used.

103LC Push button options

Walcro 103LCXP concealed flush valve button for duct installations

“XP” Button

Concealed flush valve duct installation for stainless steel toilets

“VR” Button

Walcro 103LC-SS stainless steel flush valve button for vandal proof installations

“SS” Button

104LC low pressure concealed duct toilet flush valve

Concealed toilet flush valve for low pressure. The 104LC range is a classic institutional flush valve since it incorporates a isolating valve.  The isolating valve is used when the valve itself must be maintained or repaired without cutting the water of from the whole floor/room or building. It basically makes maintenance work easy and is require in all institutional installations.

The isolating valve is attached between the flush valve and the wall. It is designed to make maintenance on the flush valve easier by not having to close the main water supply

The concealed 25mm flush valves consist of three different types.:

  • Walcro 104LCXP – Comes with a VR button and isolating valve
  • Walcro 10LC – Comes with the XP button and isolating valve
  • Walcro 104LC-SS – Comes with a stainless steel sleeve for use in vandal prone locations. Also includes the isolating valve

Operating pressure range: 30 kPa – 600 kPa.

All three valves have the same inner design.  They are designed to be installed BEHIND the toilet wall in a space called a DUCT.  Access to the toilet flush valve is not inside the bathroom or where the toilet stands, but in the duct.  Many hospitals and some government buildings have ducts where all the water piping is installed.  It is also separate from the electrical and communications wiring.  All prisons have ducts and that is where the 103LC-SS is used. See the image below where the flush valve is placed.  The toilet can be either a wall hung or pedestal type, it does not matter, as long as it is a back entry model.  Top entry models require exposed flush pipes and are not suitable for vandal prone locations.

Installations:

  • Stainless steel toilet
  • HCL Pedestal pan
  • HDTX594 Shrouded stainless steel toilet
  • CMPX592 Wall hung stainless steel toilet

Features:

  • Made in South Africa
  • DZR brass
  • 30-600 kPa operating range
  • Comes with isolating valve for easy maintenance
  • Spare parts are available.
  • Easy to maintain
Concealed toilet flush valve with isolating cutoff valve

The Walcro 104 25mm inlet range of toilet flush valves with isolating cutoff valve for easy maintenance. Three types available, XP, VR and SS button.

Concealed flush valve installation on stainless steel toilet

Stainless steel wall hung or pedestal pan toilets can be installed with a hidden flush valve if you have a duct. If there is no space behind the wall, the boxed Walcro 107 range must be used.

104LC Push button options

Walcro 103LCXP concealed flush valve button for duct installations

“XP” Button

Concealed flush valve duct installation for stainless steel toilets

“VR” Button

Walcro 103LC-SS stainless steel flush valve button for vandal proof installations

“SS” Button

106LC Low pressure concealed duct toilet flush valve

Concealed toilet flush valve for low pressure. The concealed flush valve model 106 is ideal for factories and mining or installations with slightly lower pressure than normal residential institutions. It does not come with an isolating valve so you need to install either a gate valve close by or make sure that there is a shutoff valve close by, otherwise you need to close the floor or buildings water supply to open the valve during maintenance times.

The concealed 25mm flush valves consist of three different types.:

  • Walcro 106LCXP – Comes with a VR button and isolating valve
  • Walcro 106LC – Comes with the XP button and isolating valve
  • Walcro 106LC-SS – Comes with a stainless steel sleeve for use in vandal prone locations. Also includes the isolating valve

Operating pressure range: 30 kPa – 600 kPa.

All three valves have the same inner design.  They are designed to be installed BEHIND the toilet wall in a space called a DUCT.  Access to the toilet flush valve is not inside the bathroom or where the toilet stands, but in the duct.  Many hospitals and some government buildings have ducts where all the water piping is installed.  It is also separate from the electrical and communications wiring.  All prisons have ducts and that is where the 103LC-SS is used. See the image below where the flush valve is placed.  The toilet can be either a wall hung or pedestal type, it does not matter, as long as it is a back entry model.  Top entry models require exposed flush pipes and are not suitable for vandal prone locations.

Installations:

  • Stainless steel toilet
  • HCL Pedestal pan
  • HDTX594 Shrouded stainless steel toilet
  • CMPX592 Wall hung stainless steel toilet

Features:

  • Made in South Africa
  • DZR brass
  • 30-600 kPa operating range
  • Spare parts are available.
  • Easy to maintain
Concealed toilet valves

The Walcro 106 25mm inlet range of toilet flush valves. Three types available, XP, VR and SS button. The 106 does not have an isolating valve.

Concealed flush valve installation on stainless steel toilet

Stainless steel wall hung or pedestal pan toilets can be installed with a hidden flush valve if you have a duct. If there is no space behind the wall, the boxed Walcro 107 range must be used.

104LC Push button options

Walcro 103LCXP concealed flush valve button for duct installations

“XP” Button

Concealed flush valve duct installation for stainless steel toilets

“VR” Button

Walcro 103LC-SS stainless steel flush valve button for vandal proof installations

“SS” Button

106 Exposed toilet flush valve

Specifications

The Walcro 106 is one of the most common commercial and industrial flush valves on the market.  The Walcro 106 does not have an isolating check valve as the 104 model has, but is more affordable.

The Walcro 106 should be used in areas where a stop tap is installed or where.  Both models use a 25 mm diameter BSP inlet valve.

The Walcro 106 T top entry flush valve is designed for commercial applications. It is ideal for

  • CMPX592 top entry wall hung stainless steel toilet
  • CMPX594 top entry wall hung stainless steel toilet for paraplegics
  • Stainless steel squat pan
  • CH Slop Hopper
  • CHBC Slop hopper basin combination
  • Any wall hung, floor mounted back to wall top entry ceramic toilet.

The Walcro 106 B back entry flush valve is designed for commercial applications and is ideal for

Ideal pressure range for the Walcro 106 flush valve is: 30 kPa to 600 kPa.

Flush valve features:

  • No Isolating valve
  • 25 mm BSP inlet for better flow to toilet or slop hopper
  • Top entry or back entry models
  • Made from DZR brass
  • Ideal for industrial and commercial use
  • Made in South Africa
walcro-106t-top-entry-flush-valve

WC-106T for top entry installations such as top entry toilets and slop hoppers

walcro-106b-back-entry-flush-valve

WC-106B for back entry installations such as floor standand pedestal pans.

Walcro 104 Exposed toilet and slop hopper flush valve

The Walcro 104 and 106 are very similar flush valves.  The difference is the Walcro 104 has an isolating check valve which makes maintenance and servicing much easier.  The Walcro 104 should be used in areas where a stop tap or the room in which the unit has been installed does not have an isolating valve close by. Both models use a 25 mm diameter BSP inlet valve.

The Walcro 104 T top entry flush valve is designed for commercial applications. It is ideal for

  • CMPX592 top entry wall hung stainless steel toilet
  • CMPX594 top entry wall hung stainless steel toilet for paraplegics
  • Stainless steel squat pan
  • CH Slop Hopper
  • CHBC Slop hopper basin combination
  • Any wall hung, floor mounted back to wall top entry ceramic toilet.

The Walcro 104 B back entry flush valve is designed for commercial applications and is ideal for

  • Any wall hung, floor mounted back to wall back entry ceramic toilet
  • HCL Pedestal back entry toilet
  • Stainless steel squat pans.
  • Standard stainless steel toilet

Ideal pressure range: 30 kPa to 600 kPa.

Features:

  • Isolating valve for easy maintenance
  • 25 mm BSP inlet for better flow to toilet or slop hopper
  • Top entry or back entry models
  • Made from DZR brass
  • Ideal for industrial and commercial use
  • Made in South Africa

walcro-104t-top-entry-flush-valve

walcro-104b-back-entry-flush-valve

Walcro 550 Exposed commercial toilet flush valve

The Walcro 550 comes in top entry and back entry models. These units are for exposed installation and not recommended for concealed applications. Minimum maintained pressure is 100 kPa and maximum pressure is 600 kPa. If pressure exceeds 600 kPa a Walcro pressure reducing valve (WC-WAL-PRV) must be installed before the unit.  In new buildings or new installations, a Walcro Easy Clean Filter should be installed in order to ensure that the unit has prolonged life span and maintenance off time is reduced.

The supply pipe diameter is 20 mm BSP. The Walcro 550 has SANS 1240:2002 certification and is made in South Africa.  It is designed to use potable water.

The unit is designed for commercial use.  If industrial use is require we recommend either Walcro 104 or Walcro 106 models. The unit should not be used with slop hoppers or slop hopper combo’s.

Ideal for use with the CMPX592  and CMPX594 (paraplegic) wall hung stainless steel toilet with top entry.

Spare parts are available for maintenance.

Features:

  • For use on top entry toilets
  • Adjustable volume control on unit
  • Adjustable flow time control on unit
  • Made in South Africa
  • Spares available

walcro 550 time adjusting screw

Walcro 550 flow control screw

walcro 550T

The Walcro 550T top entry flush valve for toilets is ideal for commercial applications. The valve has an aesthetic pleasing design with adjustable flow and time control.

walcro-550b-back-entry-flush-valve

The 550B used for back entry toilets such as the HCL pedestal pan. It will not fit wall hung or back to wall installations.

DAL Exposed Flush valve for toilets

The DAL exposed flush valve for toilets, slop hoppers and sluice sinks are affordable and reliable. These flush valves are exposed units and are ideal for top entry and back entry installations.

Normal operating pressure between 1.2 and 5.0 bar with a flow rate of 1.0 to 1.3 liters per second. The DAL flush valve range is extremely quiet so it is suitable for installations in hospitals, clinics and shopping malls. These units can even be installed in a home and schools. This is not a low pressure flush valve.

Technical Data

  • Flow pressure: min. 1.2 bar / recommended 2 – 5 bar
  • Operating pressure: max 10 bar
  • Test pressure: 16 bar
  • If static pressure exceeds 5 bar, a pressure reducing valve must be fitted before the flush valve.
  • Flow rate: 1.0-1.3 l/s
  • Temperature: Max 40°C
  • GR-37139000: Manual flow rate regulation
  • GR-37141000: Automatic flow rate regulation and comes with a vacuum breaker.

NOTE: The back entry flush pipe is not included and must be purchased separately. Product code GR-37107000, length 600 mm with bend of 200 mm. This can be cut to suit the installation.

exposed toilet wc flush valve

GR-37141000

exposed flush valve toilets slop hopper sluice sinks

The DAL flush valve is designed for back entry or top entry toilets, slop hoppers and sluice sinks. The flush pipe is sold separately.

grohe dal 37139000 exposed flush valve toilets wc

GR-37139000  dimensions with manual flow rate control

grohe dal 37141000 exposed flush valve toilets wc

GR-37141000 dimensions with auto flow rate control and vacuum breaker

Walcro 107 built-in boxed toilet flush valve

The Walcro 107C/HP is a built-in boxed toilet flush valve with either 20 mm BSP inlet.  Designed for toilets in non-vandal areas.

After installation the flush valve is still accessible for maintenance.

Quite often used as replacement flush valve of older concealed urinal flush valves.

The built in boxed model is also often used when there is no duct behind the toilet for the 104C, 104CXP or 104C-SS models. Ideal places where the built in flush valve is used are petrol stations, factories, mining (although duct type is better for these applications), shopping malls, schools and other non-vandal type of institutions. Note that the flush valve is accessible from the front (for convenience).

walcro toilet flush valve diagram installation

flush valve toilet walcro africa supplier concealed vandal proof

The Walcro 107 range is installed into a wall with a box for easy maintenance.

Pneumatic actuator for toilets and ducts

Pneumatic actuator for duct installed cisterns. The system is ideal for vandal prone installations where steel buttons, flanges and shafts get stolen. Since the whole system (excluding cisterns) are made from plastic there is no rust or material degradation problems which makes the pneumatic actuator ideally suited for coastal regions.

The low force with which the pneumatic actuator works also reduces wear and tear on the cistern mechanism prolonging the lifespan and reduced maintenance.

The pneumatic actuator can be used with stainless steel cisterns or plastic cisterns.  A special mechanism is required when used with stainless steel cisterns.

These actuators are ideal for duct installation with a low level or high level cistern.  The pressure pipe is 2000 mm long so the cistern can be fitted close to the ceiling.  With high level installations additional piping is required for connecting the plastic cistern to the toilet.

Features:

  • Ideal for duct installations
  • Used in industrial and commercial applications
  • Not recommended in high security or holding cell washrooms
  • Plastic design so it will not rust
  • Ideal for coastal regions
pneumatic duct toilet flush activation vandal resistant

The pneumatic flush control is ideal for duct installations. The item is made from plastic so theft is limited.
G.115.943.21.1

Dimensions of the pneumatic toilet flush valve

pneumatic-flush-actuator-diagram

Length of the unit is 370 mm. However, it can fit into a thinner wall (60 mm).

pneumatic-flush-actuator-diagram-button

Diameter of the front section of the unit (80 mm)

Flush actuator for cisterns built into a duct

Details of the complete set. The length of the pipe is 2 m. So it can also be used to activate a high level cistern placed in a duct.

Cisterns for Pneumatic push button control

There are two cisterns that can be used:

  1. Concealed cistern built into a double brick wall and used with wall hung or back to wall toilets (G.SIGMA12-350).
  2. Exposed duct type of cistern. The plastic cistern is installed behind the wall of the toilet. Ideal for vandal prone installations (G.AP123).
Geberit concealed cistern for toilets

G.SIGMA12-350

concealed behind wall cistern installation pneumatic button actuator

G.AP123

Pneumatic wall mount foot operated flush valve

Application purposes

  • For pneumatic remote flush actuation of Geberit exposed and concealed cisterns
  • For single flush
  • For solid and drywall construction
  • For Geberit Sigma concealed cisterns 12 cm
  • For Geberit Omega concealed cisterns 12 cm
  • For Geberit exposed cisterns AP123

The actuator is made from stainless steel.

There are two cisterns that can be used (See above):

  1. Concealed cistern built into a double brick wall and used with wall hung or back to wall toilets (G.SIGMA12-350).
  2. Exposed duct type of cistern. The plastic cistern is installed behind the wall of the toilet. Ideal for vandal prone installations (G.AP123).
Foot operated toilet flush mechanism

G.115.918.001

Foot operated toilet flush valve diagram

Foot operated toilet flush valve size