Broen-Lab Uniflex ™

Broen-Lab Uniflex ™ Lift/Turn fittings are manufactured of the highest quality materials, primarily brass. The surfaces of all fittings are finished in the chemically resistant BROEN-LAB Polycoat. Special requirements of your local Gas board should be checked before commencing installation in laboratories. All pipe work should be purged to ensure cleanliness before fitting. The gas laboratory fittings from BROEN-LAB are designed and manufactured with the requirements of a modern laboratory in mind. The hallmarks of these fittings are good performance, durability, easy operation, flexibility and streamlined design, along with an easy-to-clean and attractive appearance. Fittings from BROEN-LAB are ideal for all types of gas laboratories, and are delivered with easy-to-mount fixing items/mounting kit, that will keep the fitting fully locked in its position when installed. Consequently, the fitting will not turn unintentionally, which would result in leaks.

Pressure conversion table for gasses

Conversion	bar	PA	psi
1 bar	1	1 x 10^-5	14.5
1 PA	1 x 10^-5	1	1.45 x 10^-4
1 psi	6.9 x 10^-2	6.9 x 10³	1

Valves for burning gases with Lift/Turn safety handles are based on a BALLOFIX® ball valve. Opening/closing function 90° Lift/Turn. The valves for burning gases can be used for natural (G), liquefied petrol (LPG), town and low pressure bottle gases as well as vacuum , compressed air and nitrogen. Allowable pressure test after installation: 1.5 x max. working pressure without function of the valve. Minimum working pressure 700 kPa (7 bar or 100 psi).