Stainless Steel Slop Hopper Specifications
Stainless steel slop hoppers are commonly used in hospital sluice rooms, dirty utility rooms, clinics and other healthcare facilities for the disposal and flushing of liquid and semi-solid waste. We provide detailed technical specifications for the various stainless steel slop hopper configurations available from Afindcom, including dimensions, stainless steel grades, mounting arrangements, flushing systems, waste outlets and high-level cistern options.
Slop hopper combination with high level cistern
Model SS-AR16L-HLC stainless steel slop hopper and sink combo, size 1600x600mm manufactured in 1,2mm thick grade 304 (18/10) stainless steel with one sink bowl size 495 x 400 x 190mm with provision for a 40mm waste outlet without overflow and a sluice with hinge bucket grid fitted over the funnel adjacent to sink bowl. The sluice bowl is fitted with an integral flushing rim and a 38mm round x 150mm long vertical flush pipe inlet and 100mm outlet. The 100mm outlet is connected to a PVC underground gulley trap (optional SW-PGT110). The unit has an 50x15mm apron all round. The underside of the draining board is fitted with a mild steel galvanized sheet and supporting frame. Unit to be fitted with 40mm square stainless steel gallows brackets to back (Optional 40mm round stainless steel legs with adjustable foot pieces to the front).
Model SS-AR16L-HLC slop hopper specifications:
| Specification | SS-AR16L-HLC |
|---|---|
| SKU | SS-AR16L-HLC |
| Dimensions | 1 600 x 600 mm |
| Bowl dimensions | 340 x 400 x 199 mm |
| Material | 1.2mm Grade 304(18/8) |
| Waste outlet | 100 mm / 38mm |
| Waste included | Yes 38 mm sink waste |
| Flush inlet | 41mm OD |
| Mounting | Wall mounted |
| Flush inlet | 38 mm OD |
| Trigger spray | Wall mounted with isolating valve |
| Taps | Cobra 171/041/NV deck mounted |
| Flush system | High level cistern |
SS-AR16L-HLC
Slop hopper with basin combo and high level cistern. Comes with the deck mounted tap and trigger spray.
Model SS-AR16R Slop hopper basin combo with flush valve
The SS-AR16R & SS-AR16L is a stainless steel slop hopper basin combination manufactured on one level. It can be ordered with either a flush valve (W-B106 or W-B104). The splash back is also optional. The main bowl can be customized. Standard length for the SS-AR16 is 1600mm but the length can be customized. Note the shortest length is 1200mm.
Tap holes can be pre-drilled to the back or sides of the main center bowl. It can also be fitted with wall mounted taps so no need for tap holes.
| Specification | SS-AR16L |
|---|---|
| SKU | SS-AR16L |
| Dimensions | 1 600 x 600 mm |
| Bowl dimensions | 340 x 400 x 199 mm |
| Material | 1.2mm Grade 304(18/8) |
| Waste outlet | 100 mm / 38mm |
| Waste included | Yes 38 mm sink waste |
| Flush inlet | 41mm OD |
| Mounting | Wall mounted |
| Flush inlet | 38 mm OD |
| Trigger spray | Wall mounted with isolating valve |
| Taps | Cobra 171/041/NV deck mounted |
| Flush system | W-B104 or W-B106 Flush valve |
SS-AR16R
Slop hopper basin combo one level with flush valve. The unit is also available without a splashback.
Model SS-SH single slop hoppers with flush valve.
Model SS-SH Slop Hopper 540 x 540 mm manufactured from grade 304 (18/10) stainless steel 1,2 mm thick with a 100 mm high integral splash back to the rear and both sides. The cone has an integral flushing rim and a 110 mm waste outlet for pan connector, the inlet is fitted with a 38 x 250 mm long vertical flush pipe for a standard top entry flush valve, such as the W-106. A hinged bucket grid, manufactured from 10 mm diameter grade 304 (18/10) stainless steel round bar is fixed over the hopper opening. The slop hopper is wall mounted with two 40 x 40 mm square stainless steel wall mounting gallows brackets. Unit fixed to wall 600 mm from the top of the front apron to the finish floor level with 4 off anchor bolts (bolts not supplied). Note plumbing or flush valve is not included in the price of the SH slop hopper.
SS-SH
Stainless steel slop hopper with W-106 flush valve.
Slop hopper dimensions top view
Slop hopper dimensions front view
Walcro B104 or B106 Flush valve – 25 mm water supply flush valve. The W-B1-4 Comes with isolating check valve and telescopic adjustment for easy adjustment and positioning of the valve over the inlet of the slop hopper. The flush valve is made from CP DZR brass and is operated via a small lever on the side of the valve. The W-B106 does not have an isolating valve.
SS-SH Slop hopper installation with two trigger sprays.
W-B104 top entry flush valve only. Includes an isolating valve for easy maintenance
W-106 flush valve without isolating valve
Model SS-SH Single Slop hoppers with high level cistern.
Stainless steel slop hopper model SS-SH-HLC with a high-level cistern and its components:
- 11 liters stainless steel high-level cistern
- Supa Flush Valve and pull chain
- 41mm diameter stainless steel flush pipe and
- 41/38mm reducing chrome plated coupling.
- Standard stainless steel top entry slop hopper
Use the high-level cistern option with low water pressure or in rural areas. The high-level cistern is easy to maintain compared to a high pressure flush valve which has a complex mechanism. The flush valves require clean filtered water. We do not recommend using borehole water with flush valves, rather install a high level cistern.
Specification: Slop hopper SS-SH-HLC with dimensions 540x540x575mm, manufactured from 1.2mm thick grade 304(18/10) stainless steel. A 100mm high integrated splashback to the left, right and back end. The hopper (cone) is seamless and no prominent signs of welding. The hopper has an integrated flushing rim attached to a 38x250mm vertical flush pipe on which the high level cistern is fitted with a compression adaptor. The hopper outlet is ±101mm in diameter on which a gulley trap connecter is fitted (Not included). The hopper is covered with a swivel hinged bucket grid manufactured from 10mm diameter grade 304(18/10) stainless steel. The slop hopper is mounted against a brick wall with two 40x40mm square stainless steel gallows brackets and four anchor bolts (Not supplied). The unit is installed as low as possible but not higher than 600mm from the top of the front apron to the floor.
SS-SH-HLC
Slop hopper and high level cistern
Installation diagram and dimensions of the slop hopper and high level cistern
CHBC Slop hopper basin combination.
The CHBC slop hopper basin combination (combo unit) is made from 1.2mm thick grade 304 stainless steel. Dimensions: 965 x 550 mm. The CHBC slop hopper basin combo is compact and saves space inside the hospital room since it combines a slop hopper and basin. Furthermore, they are right next to each other making work more efficient and hygienic. The sluice is slightly lower for ease of access especially if a heavy bucket must be lifted and emptied into the sluice.
CHBC slop hopper basin combination sink with sluice bowl to the left and basin to the right. Flush mechanism either a flush valve or high level cistern
CHBC slop hopper basin combination sink with sluice bowl to the right and basin to the left. Flush mechanism either a flush valve or high level cistern
CHBC Slop hopper basin dimensions
The CHBC Slop Hopper Basin Combo has two flushing options.
CHBC slop hopper combination with flush valve
This combination is ideal for most hospitals and clinics. You require a good source of 3 bar water supply in order for the flushing mechanism to work properly. The following Walcro flush valves are recommended:
- Walcro 104T with isolating valve
- Walcro 106T without isolating valve
We recommend the Walcro 104 with isolating valve because it makes maintenance very easy (Note that the Walcro 550 cannot be used in this system). You don’t need to shut off all the water of the floor, you only need to close the isolating valve to work on the flush valve. In areas where water is not that clean and building and alterations persist, we recommend using an inline strainer or filter to reduce maintenance and downtime on the flush valve.
CHBC slop hopper combination with stainless steel cistern.
This option is ideal for rural hospitals and clinics. No need to worry about maintaining water pressure, as long as there is enough pressure to fill the stainless steel cistern the unit will work properly. Two types of cisterns are available;
- Low-level cistern with front flush mechanism
- High-level cistern with pull chain.
The most effective option is the high level cistern as the water flushes with higher pressure and velocity.
Vaal Ceramic slop hopper combo
The ceramic slop hopper combo is made from high-quality ceramic fireclay. Left hand and right-hand versions are available and are all made on order. It comes as a complete unit and is ready for installation. The ceramic slop hopper combo consists of the following components:
Components
- 104° Outlet slop hopper 405 x 530 x 360 mm, complete with resin pads, c.p. bucket grating, and PVC junction pan connector.
- Fireclay Lab sink 600 x 400 x 200 mm (code 2361). With 38 mm c.p. waste (86 mm flange, 89 mm tailpiece) and plug (code 8783Z0), with PVC bottle trap and waste pipe.
- Drainer 605 x 400 mm (code 1461), with bottle trap and waste pipe.
- 4 x brackets (code 8106Z0).
- 2 x levelling plates (code 8123Z0).
- 2 x outlet levelling plates (code 8124Z0).
- Protea 11 litre high-level cistern complete with fittings and chain (code 7102HL).
- Chrome plated flush pipe and holderbat (code 1710Z2).
Accessories (optional):
- 1 x c.p. 13 mm wall type combined mixer supply fitting with lever handles,
- flexible tube
- jet nozzle and
- wall hook (Cobra code 518-21).
Specifications
- Slophopper 13.50 kg 0.070 m³
- Sink 21.00 kg 0.048 m³
- Drainer 12.50 kg 0.027 m³
- Cistern 23.00 kg 0.050 m³
VL-751599
Ceramic clop hopper sluice sink
DISCONTINUED – NO STOCK. USE THE ALTERNATIVE SS-AR16L-HLC
Ceramic slop hopper now discontinued
Side dimensions of the ceramic slop hopper
FAQ
Recommended accessories for stainless steel slop hoppers.
GR-27514001
Trigger spray set with isolating valve and bracket.
CO-521-21/N
Deck mounted elbow operated medical tap.
CO-503-21B
Medical elbow action basin pillar tap for cold water
You may also be interested in the following products:
SS-LDS-GB
LDS Drip sink with stainless steel gallows brackets. Galvanized brackets and optional front feet also available on request.
SS-DSG
Hospital drip sink or cleaner sink
