Fixing options for sinks & tablesThe standard fixing method of catering sinks are with round 40mm stainless steel legs, however, there are other options as well and sometimes floor and hygiene restrictions force vendors to use different feet.
The fixing options for tables and workbenches have different ordering codes.
Alternatives to the standard 40mm round feet are
- 40mm square feet
- Gallows brackets – the unit is attached to a strong double brick wall
- Gallows brackets with front feet – for extra support in front
- Cantilever brackets – The complete unit is attached to the wall and nothing touches the floor. Especially when the corner of the room’s floor is made with an arc so that the unit’s feet cannot be placed into the corner.
|Order code||New code||Old code||Description|
|F-2120003||2120003||352658||40mm diameter round legs with ADJ foot flange (One pair required for each side thus 2 pairs to complete a set). 2400 mm units require 3 pairs of legs. (included as standard in all quotes as this is the most popular and economical option)|
|F-2120024||2120024||352660||40 x 40mm Square legs with ADJ foot flange (One pair required for each side thus 2 pairs to
complete a set). 2400 mm units require 3 pairs of legs
|F-2120025||2120025||352662||40 x 40mm Square gallows Bracket (One leg for each side). 2400 mm units require 3 pairs of brackets.|
|F-2120026||2120026||352664||40 x 40mm Square gallows Bracket with detachable front leg (One leg for each side). 2400 mm units require 3 sets. 90° angled bracket at the back so that the sink can be fixed against a wall with two feet in front.. Ideal if you require strict hygiene at the back. It also allows for easy cleaning behind the sinks. Note that you cannot use gallows brackets on dry walls without structural support inside the wall.|
|R-2120027||2120027||352666||40 x 40mm Cantilever Bracket. (One leg for each side). 2400 mm units require 3 pairs of cantilever brackets. Exclusively used in areas where cleaning under the sink is of utmost importance. You will require a strong double brick wall to support the S2 double bowl catering sink with the cantilever bracket.|
Fixing options apply only to the following catering sinks:
- Single and double bowl atering sinks
- Single and double bowl pot sinks
- S1P1 combination catering and pot sink
The fixing options are also available to the following table and wall benches