Stainless steel pot sinks

Single bowl pot sinks

Model KP1 grade 304 (18/10) Stainless Steel single bowl pot sink, size 900 x 650mm with a 150mm high integral splashback to the back and 60 x 12mm turndown with a beaded edge on the remaining sides. The underside sprayed with vermin proof bitumastic sound deadening material and supported with a 30 x 30 x 3mm framework and galvanised mild steel backing sheet. Fitted on to 41mm ø round stainless steel detachable legs with adjustable foot pieces. Bowl size 760 x 460 x 380mm deep.

The single bowl pot sink is ideal for commercial and industrial applications.  The high quality grade 304 stainless steel is strong enough to withstand most standard commercial and industrial applications especially in the catering industry.

Note that due to the frame that is used the single bowl pot sink cannot be made wider than 460mm without changing the complete design of the unit.  Although the 760 mm width can be customized, larger units become more wash troughs at a more affordable price. Wash troughs can also be made deeper than the single bowl pot sink.

Although the frame is 900 mm in length (from left to right as you view the single bowl pot sink), wider frames can be ordered placing the bowl either to the left, right or centre.  These are all custom orders.

Features

  • Pressed bowls 500 x 500 x 230 mm deep
  • Grade 304 (18/10) Stainless Steel 1.2mm gauge
  • Fully sound deadened with galvanised backing sheet
  • Hospital bead to prevent spillage
  • 133 Litre Bowl Capacity

P1 accessories

  • Stainless or mild steel galvanised solid under shelf
  • Stainless or mild steel galvanised slatted under shelf
  • Non-standard sizes upon request
  • Splash backs to ends
  • 26 workdays lead time for manufacturing if there is no stock

single-bowl-pot-sink

single-bowl-pot-sink-diagram-side

single-bowl-pot-sink-diagram-top

Double bowl pot sinks

Franke model P2 double bowl Pot Sink double centre/end (please specify) bowl pot sink, manufactured from grade 304 stainless steel 1,2 mm thick with a 150 mm high integral splash back and 50 x 10 mm turndown with a beaded edge on the remaining sides. The pot sinks are fabricated 760 x 460 x 380 mm deep with a 40 mm waste outlet. The underside of the pot sinks are sprayed with vermin proof bitumastic sound deadening and supported with a 30 x 30 x 3 mm framework and galvanised mild steel backing sheet. The pot sink unit can be fixed 900 mm high from the top of the front apron to the finish floor level with anchor bolts (bolts specified elsewhere). Please refer to fixing table for fixing options.

Features

  • Pressed bowls 500 x 500 x 230 mm deep
  • Grade 304 (18/10) Stainless Steel 1.2mm gauge
  • Fully sound deadened with galvanised backing sheet
  • Hospital bead to prevent spillage
  • 133 Litre Bowl Capacity

P2 accessories

  • Stainless or mild steel galvanised solid under shelf
  • Stainless or mild steel galvanised slatted under shelf
  • Non-standard sizes upon request
  • Splash backs to ends

double-bowl-pot-sink-stainless-steel

p2-double-bowl-pot-sink-diagram