Stainless steel curved back urinals
The stainless steel curved back urinals are ideal for larger institutional installations. Made from grade 304 (18/10) stainless steel it is vandal resistant and can be installed in coastal regions. The curved back urinal is designed to have the back end filled with sand to provide protection of the back urinal plate. The filling also provides good resistance with vandalism.
Internal dome outlet has a 70 mm diameter and the external connection is 110 mm diameter.
Curved back urinals come in various sizes and are made on request: lengths from 610 mm to 6000 mm.
Auto flush and manual flush available. The auto-flush curved back urinal comes with a 12 mm drip cock which can be set to suitable flushing cycles depending on level of use of the urinal. The manual flush comes with a 28 mm CP conex fitting to attach a high volume flush valve.
The length of the curved back urinal will determine how many flush valves you require to flush the system. The following specs are important to notice:
- 600 – 2135 mm: 1 Inlet 1 flush valve
- 2285 – 3350 mm: 2 inlets 2 flush valves
- 3365 – 4570 mm: 3 inlets 3 flush valves
- 4875 – 6095 mm: 4 inlets 4 flush valves
Using less that what is recommended will result in inefficient flushing and un-hygienic conditions.
Manual flush curved back urinal
Auto Flush curved back urinal
Dimensions: length of the urinal can vary from 610- 2440 mm