Pressed body tray
Franke Pressed stainless steel body tray manufactured from grade 304 (18/10) stainless steel 1,2 mm thick, with a 20 mm square tubing frame all round, two 25 mm diameter support fitted longitudinally to the underside for the Rapid Transfer System and two 20 mm diameter stainless steel handles.
There are four designs to choose from:
- Standard body tray in grade 304 and 316 stainless steel: 2095 x 567 mm
- Obese body tray in grade 304 and 316 stainless steel; 2095 x 667 mm
BTS and BTO Body Trays
The BTS and BTO body trays are designed to be used with the T4 and T3 body racks. They can be customized to an extent. They slide easily on the transport trolleys which can also be found on this site.
BTS standard body tray specification
Franke BTS Standard Body Tray is manufactured from grade 304 stainless steel. It comes complete with 25 mm Ø round stainless steel frames to the bottom. The handles are designed to suit the T4 mortuary body racks. They fit most commonly used transport trolleys, lifting trolleys and elevation units.
BTO obese body tray specification
Franke BTO Obese Tray is manufactured in grade 304 stainless steel. It comes complete with 25 mm Ø round stainless steel frame to the bottom sides. The handles are designed to suit the T3 mortuary body racks. They also fit on the various transport and lifting trolleys commonly used in mortuaries. These units can be customized to an extent as they are not pressed by a machine but custom made. The pressed models cannot be custom made.