Multi bowl hand wash basins

The pressed multi bowl range are ideal basins for schools, factories and public ablutions.  The bowls are pressed stainless steel fitted to a rectangular frame which can hold one or two taps.  These bowls can also be wall mounted with gallows brackets and front feet.  The number of gallows brackets and front feet will depend on the length of the bowl frame.  These pressed multi-bowl basins are made from grade 304 stainless steel 1.2mm thick so they will not rust and thus are very hygienic. The basins do not come with pre-drilled tap holes. Minimum tap hole diameter is 21mm for standard metered and demand pillar taps. Mixers require 32mm diameter hole.

Flat bed multi bowl hand wash basins are used most often in the food industry. They are easy to clean and their sole function is for washing hands, that is why they are so shallow. Three standard models are available, FB12, FB18 with three washing bays and FB24 with four washing bays. Since it is used for the food industry, hands free washing systems are quite often installed.

The flat bed hand wash basin range (FB12, FB18 and FB24) are manufactured from Grade 304 (18/10) Stainless Steel, 1,6mm gauge. The units include a 50mm deep trough like basin with 40mm waste outlets and 100 mm apron all round. Basin to include outlets and tap holes evenly spaced and to be fixed to the wall with 3mm Stainless Steel bracket for reinforcement.

• Infra red: deck mounted taps (CO-EL1000) for either cold water only or pre-mixed water with CB-THERM-15 thermostatic anti-scald mixer.
• Metered taps: Walcro WC-420 (Set at an angle) or Walcro 100R pillar tap (Holes must be 22mm diameter minimum for taps) or the hi-rise metered sink tap SR-BMDT.
• Wall mounted metered concealed Walcro 155UW with W-GWS/15 wall mounted spout in vandal prone areas.