Catering sinks

Single bowl catering sinks

Model “S1” Catering Sinks. Single bowl positioned at the end or center (please specify). The S1 catering sinks bowls are manufactured from grade 304 stainless steel and are 1,2 mm thick with a 150 mm high integral splash back to the rear and 50 x 10 mm turndown with a beaded edge on the remaining sides. The S1 catering sink with a pressed 500 x 500 x 230 mm deep bowl comes with a 40 mm waste outlet. The underside of the sink’s bowl is sprayed with vermin proof bitumastic sound deadening and supported with a 30 x 30 x 3 mm framework and galvanized mild steel backing sheet. The single bowl catering sink can be fixed 900mm high from the top of the front apron to the finish floor level with anchor bolts (bolts specified elsewhere).

The S1 catering sink bowl can be placed on the left, right or center.  Please see additional information for the various models.  Under shelves are also available and must be ordered separately. Two basic models are used; solid or slated under shelf. Choice really depends on the application of the S1 catering sink.  In most commercial and industrial kitchens, the slatted under shelf is used since it is easier to clean and see under the shelf.  If smaller items are used such as small bottles or boxes, then the solid under shelf is recommended.

The single bowl catering sink comes in three lengths (from left to right viewing the sink). So, a total of 6 configurations.  The placement of the bowl for each table length does not influence the price of the single bowl catering sink. Standard popular lengths are 1500, 1675, 1700, 1850 & 2400mm. With bowl position either left, right or center. Note the 2400mm unit required at least 3 sets of feet.

Features

  • Grade 304 (18/10) Stainless Steel 1,2mm gauge
  • Sound deadened with galvanized backing sheet
  • Hygienic and durable
  • Deep hospital bead to prevent spilling
  • 14 workday lead time for manufacturing if there is not stock available.
  • Any custom work to be done requires a minimum of 22 workdays lead time.
single bowl stainless steel catering sinks south africa

Single bowl catering sink. Various lengths available

Double Bowl Catering sink

S2 double bowl Catering Sink made from high quality grade 304 stainless steel is the best in its class.  Available in nine configurations; left-, right hand and center bowl configurations and three table lengths, 1500 mm, 1850 mm and 2400 mm.  The bowls each 505 x 505 x 230 mm are made from 1.2 mm thick stainless steel.  The S2 double bowl sink uses 40mm standard wastes. The underside of the S2 double bowl catering sink is sprayed with vermin proof bitumastic sound deadening and supported with a 30 x 30 x 3 mm framework and galvanized mild steel backing sheet. The sink comes standard with a 150 mm high integral splashback. The rear is made with 80 x 10 mm turned down beaded edge on the remaining sides. This reduces spillage on to the floor increasing hygiene of your work area. The S2 double bowl catering sink unit can be fixed 900 mm high from the top of the front apron to the finish floor level with anchor bolts (Not supplied).

Features

  • Pressed bowls 505 x 505 x 230 mm deep
  • Grade 304 (18/10) Stainless Steel 1.2mm gauge
  • Fully sound deadened with galvanized backing sheet
  • Hospital bead to prevent spillage
  • 57 Liter Bowl Capacity
  • 22 Manufacturing lead time if there is no stock.
  • Wood crated for easy transport
  • Minimum of ±26 working day lead time for manufacturing if there is no stock.
  • Nonstandard items can be ordered
double bowl catering sink africa

Double bowl catering sink. various custom lengths can be made

 

 

Note that the 2400 mm table requires three sets of legs for support while the 1500 mm and 1850 mm only uses two pairs.

Double Bowl Preparation Sink

Model S1P1 double bowl Preparation sink manufactured from grade 304 stainless steel 1,2mm thick with a 150 mm high integral splash back to the back and 50 x 10 mm turndown with a beaded edge on the remaining sides. Sink with a pressed catering bowl 500 x 500 x 230 mm deep and a fabricated pot sink bowl 760 x 460 x 380 mm deep with 40mm waste outlets. The underside sprayed with vermin proof bitumastic sound deadening and supported with a 30 x 30 x 3 mm framework and galvanised mild steel backing sheet. Unit fixed 900 mm high from the  top of the front apron to the finish floor level with anchor bolts (bolts specified elsewhere).

Features

  • Grade 304 (18/10) Stainless Steel 1.2mm gauge
  • Sound deadened with galvanised backing sheet
  • Hospital bead to prevent spillage
  • 1 x 57 Litre Bowl Capacity
  • 1 x 133 Litre Bowl Capacity
  • 22 workday manufacturing lead time if there is no stock
Franke S1P1 double bowl preparation sink stainless steel

Franke S1P1 Preparation sink

S1P1-double-bowl-preparation-sink-diagram-side
Franke S1P1 double bowl preparation sink diagram top

Custom catering sinks

Custom variations of the S2 Double bowl catering sink is also available on request.  Popular customizations are:

  • Larger splashback area of 300 – 500 mm high.
  • Installation of soap dispensers and hand towel accessories on the enlarged splashbacks.
  • Complete removal of the splashback
  • Using the S2 double bowl sink as a drop-in sink by removing the legs and support bracket. Also reduces the cost of the sink.

Fixing options for catering sinks

The single and double bowl catering sink comes standard with 40mm round stainless-steel legs. Optional other designed feet are:

  • 2120003/352658 40mm diameter round legs with ADJ foot flange (One pair required for each side thus 2 pairs to complete a set). 2400 mm units require 3 pairs of legs. (included as standard in all quotes as this is the most popular and economical option)
  • 2120024/352660 40 x 40mm Square legs with ADJ foot flange (One pair required for each side thus 2 pairs to complete a set). 2400 mm units require 3 pairs of legs
  • 2120025/352662 40 x 40mm Square gallows Bracket (One leg for each side). 2400 mm units require 3 pairs of brackets.
  • 2120026/352664 40 x 40mm Square gallows Bracket with detachable front leg (One leg for each side). 2400 mm units require 3 sets. 90° angled bracket at the back so that the sink can be fixed against a wall with two feet in front. Ideal if you require strict hygiene at the back. It also allows for easy cleaning behind the sinks. Note that you cannot use gallows brackets on dry walls without structural support inside the wall.
  • 2120027/352666 40 x 40mm Cantilever Bracket. (One leg for each side). 2400 mm units require 3 pairs of cantilever brackets. Exclusively used in areas where cleaning under the sink is of utmost importance. You will require a strong double brick wall to support the S2 double bowl catering sink with the cantilever bracket.

Table feet options 40mm round feet 352658 - 2120023

Table feet option cantiliver bracket 352664 - 2120026

table feet option cantiliver bracket 352662 - 2120025

square table feet 352660 - 2120024

cantilever bracket for tables workbenches - 352666 - 2120027