Stainless steel baths

Stainless steel inset baby bath

Baby baths are used in hospitals and clinics, even in doctors rooms but that is rare.

The baby bath can be ordered to fit as an inset unit or mounted against a wall with gallows brackets and with two front feet.

The model inset Baby Bath is 915 x 550 mm and is manufactured from grade 304 (18/10) stainless steel 1,2 mm thick with a 150 mm without integral splash back to the rear. The baby baths on a table comes with the integrated splashback to the rear. Unit to be fitted with one piece pressed semi circular bowl measuring 695 x 385 x 150 mm deep with a 40 mm waste outlet.

NOTE the waste is not supplied. The underside of the drainer has vermin proof bitumastic sound deadening applied. The unit is supported with a galvanized backing sheet.

It is recommended that the unit must be fixed 900 mm high from the top of the front apron to the finish floor.  This ensures a comfortable working position.  If gallows brackets and front feet are used, the front feet must be secured  level with anchor bolts  to the floor. (bolts specified elsewhere).

Features

  • Grade 304 stainless steel
  • Inset or wall mounted
  • High quality welding with hygiene in mind

Inset baby bath

inset baby bath dimensions sizes

Stainless steel free standing

Wall mounted stainless steel baby bath 1500 x 555 mm manufactured from grade 304 (18/10) stainless steel 1,2 mm thick with a 150 mm integral splash back to the rear. The baby bath is fitted with one piece pressed semi circular bowl measuring 695 x 385 x 150 mm deep with a 40 mm waste outlet. The underside of the drainer shall have a vermin proof bitumastic sound deadening supported with a galvanized backing sheet. Unit fxed 900 mm high from the top of the front apron to the finish foor level with anchor bolts (bolts specifed elsewhere).

Features

  • Grade 304 (18/10) 1.2mm Stainless Steel
  • Hygienic and durable
  • Pressed semi-circular bowl 0.9 Gauge
  • Left hand or right hand versions
  • Free standing and wall mounted units available
hospital baby bath table stainless steel afindcom
>hospital baby bath table stainless steel afindcom
baby bath dimensions
table baby bath dimensions gallows brackets wall mount
inset baby bath dimensions sizes

Comparison of wall mounted and free standing baby baths:

The baby baths can be ordered in two mounting configurations. Free standing with two stainless steel feet and wall mounted with two gallows brackets to fix the unit to the wall and two stainless steel feet.  The prices indicated are for wall mounted units, since these are the most popular.

stainless steel baby bath wall mounted supplier manufacturer

Wall mounted baby bath with gallows brackets and two front feet

baby bath table afindcom

Fee standing baby bath

Recommended medical mixer

elbow action medical tap wall mount long spout

Wall mounted medical elbow action mixer (Product code: GR-32793000)

Elbow action, progressive control wall type mixer with underarm swivel outlet. ½” BSP male connection inlets.

Features

  • Wall mounted Single Sequential Single-lever basin mixer 1/2″
  • Designed to save water with flow control
  • Long life ceramic cartridge
  • Adjustable flow rate limiter
  • Adjustable temperature limiter
  • Adjustable minimum flow rate 6 l/min.
  • Cast swivel spout, lockable with
  • Flow straightener 9 l/min.
  • Water projection 256 mm
  • Industrial metal lever
  • Lever length 170 mm
  • S-unions
  • Minimum pressure 1.0 bar